 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20521 rev. G 03/03 30WQ04FN SCHOTTKY RECTIFIER 3.5 Amp D-Pak (TO-252AA) Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 3 Apk, TJ = 125C 40 500 0.49 - 40 to 150 V A V C Description/ Features The 30WQ04FN surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 30WQ04FN Units 3.5 A 2.38 (0.09) 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 4 2.19 (0.08) 1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24) 1.27 (0.05) 0.88 (0.03) 6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 1 2 3 5.68 (0.22) 10.42 (0.41) 9.40 (0.37) 0.51 (0.02) MIN. 6.48 (0.26) 10.67 (0.42) 5.97 (0.23) 1.52 (0.06) 1.15 (0.04) 2x 1.14 (0.04) 0.76 (0.03) 2.28 (0.09) 2x 4.57 (0.18) 1 2 3 4 - Anode - Cathode - Anode - Cathode 3x 0.89 (0.03) 0.64 (0.02) 2x 2.54 (0.10) 1.65 (0.06) 2x 2.28 (0.09) 2x 0.58 (0.02) 0.46 (0.02) Base Cathode 4, 2 Conform to JEDEC outline D-Pak (Similar to TO-252AA) Dimensions in millimeters and (inches) 1 3 Anode Anode www.irf.com 1 30WQ04FN Bulletin PD-20521 rev. G 03/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 40 VRWM Max. Working Peak Reverse Voltage (V) 30WQ04FN Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 7 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 500 80 8.0 1.0 A mJ A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied 30WQ... 3.5 Units A Conditions 50% duty cycle @ TC = 135C, rectangular wave form TJ = 25 C, IAS = 1 Amp, L = 16 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 30WQ... 0.53 0.67 0.49 0.62 Units V V V V mA mA V m pF nH @ 3A @ 6A @ 3A @ 6A TJ = 25 C TJ = 125 C TJ = TJ max. Conditions TJ = 25 C TJ = 125 C VR = rated VR IRM Max. Reverse Leakage Current * See Fig. 2 (1) 2 24 0.34 37.33 189 5.0 10000 VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Typical Junction Capacitance Typical Series Inductance VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle < 2% V/s (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range (*) Max. Storage Temperature Range 30WQ... -40 to 150 -40 to 150 4.7 0.3 (0.01) D - PAK Units C C C/W DC operation g (oz.) Conditions RthJC Max. Thermal Resistance Junction to Case wt Approximate Weight Case Style (*) dPtot dTj < 1 Rth( j-a) * See Fig. 4 Similar to TO-252AA thermal runaway condition for a diode on its own heatsink 2 www.irf.com 30WQ04FN Bulletin PD-20521 rev. G 03/03 100 100 TJ= 150C Reverse Current - I R (mA) 10 125C 100C 75C 0.1 50C 0.01 25C 0.001 0 5 10 15 20 25 30 35 40 Reverse Voltage - V R (V) 1 Instantaneous Forward Current - I F (A) 10 Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage TJ= 150C TJ= 125C TJ= 25C 1000 Junction Capacitance - C T (pF ) TJ= 25C 100 1 0 0.4 0.8 1.2 1.6 2 2.4 2.8 Forward Voltage Drop - V FM (V) 10 0 5 10 15 20 25 30 35 40 45 Reverse Voltage - V R(V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 T hermal Impedance Z thJC (C/ W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM t1 Notes: S ingle Pulse (T hermal R esistance) 0.1 0.00001 t2 1. Duty factor D = t 1/ t 2 2. Peak T = P x Z thJC+ TC J DM 0.01 0.1 1 0.0001 0.001 t 1 , Rectangular Pulse Duration (S econds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 30WQ04FN Bulletin PD-20521 rev. G 03/03 155 Allowable Case T emperature - (C) 150 145 140 135 130 125 120 115 110 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Average Forward Current - I F(AV) (A) see note (2) 3 Average Power Loss - (Watts) 2.5 2 1.5 1 0.5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Average Forward Current - I F(AV) (A) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMSLimit DC DC S quare wave (D = 0.50) 80% Rated V Rapplied Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current 1000 Fig. 6 - Forward Power Loss Characteristics Non-R epetitive S urge Current - I FS (A) M 100 At Any R ated Load Condition And With Rated V RRM Applied Following S urge 10 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 30WQ04FN Bulletin PD-20521 rev. G 03/03 Marking Information EXAMPLE: THIS IS AN 30WQ04FN INTERNATIONAL RECTIFIER LOGO 4 (K) PART NUMBER 30WQ04FN 712A 5K3A ASSEMBLY LOT CODE 2 (K) DATE CODE (YWWA) Y = YEAR W W = WEEK A = LINE 1 (A) 3 (A) Tape & Reel Information 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 12.1 (0.48) 11.9 (0.47) 2.6 (0.10) DIA. 1.5 (0.06) 0.35 (0.01) 0.25 (0.01) TR 7.0 (0.28) 6.8 (0.26) 2.75 (0.11) 2.55 (0.10) 16.3 (0.64) 15.7 (0.62) FEED DIRECTION 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10) 16.3 (0.64) 15.7 (0.62) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10) 16.3 (0.64) 15.7 (0.62) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 13 (0.52) DIA. 22.4 (0.88) TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 375 (14.17) DIA. MAX. 50 (1.97) DIA. www.irf.com 5 30WQ04FN Bulletin PD-20521 rev. G 03/03 30WQ04FN ******************************************** * This model has been developed by * * Wizard SPICE MODEL GENERATOR (1999) * * (International Rectifier Corporation) * * contains Proprietary Information * ******************************************** * SPICE Model Diode is composed by a * * simple diode plus paralled VCG2T * ******************************************** .SUBCKT 30WQ04FN ANO CAT D1 ANO 1 DMOD (0.01614) *Define diode model .MODEL DMOD D(IS=1.1021044955238E-04A,N=1.03763733127871,BV=53V, + IBV=0.225832353615935A,RS= 0.000439008,CJO=6.29671162330771E-08, + VJ=0.169606385579256,XTI=2, EG=0.72244495735053) ******************************************** *Implementation of VCG2T VX 1 2 DC 0V R1 2 CAT TRES 1E-6 .MODEL TRES RES(R=1,TC1=96.5402599365199) GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-3.005809E-03/96.54026)*((V(2,CAT)*1E6)/(I(VX)+1E-6)1))+1)*6.266778E-02*ABS(V(ANO,CAT)))-1)} ******************************************** .ENDS 30WQ04FN Thermal Model Subcircuit .SUBCKT 30WQ04FN 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 5 4 3 2 4 3 2 1 4 3 2 1 8.75E-04 5.09E+01 3.62E+02 2.35E+03 1.00E-07 2.07E+00 1.92E+00 7.07E-01 .ENDS 30WQ04FN Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 6 www.irf.com |
Price & Availability of 30WQ04FN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |